Canon PIXMA G3260
setup is not completing.
Canon PIXMA G3260 setup is not completing? Printer setup fails most often when the app, network band, or device discovery step does not match what the printer expects. On this tank model, check Canon PRINT discovery, GI-21 ink flow, and rear-tray paper alignment first. Check the exact supply and indicator pattern for this model below.
Try these in order.
Stop as soon as the printer behaves. Each step removes one likely cause without changing settings you may need later.
- The setup app stops before adding the printer
- The printer is found but cannot finish registration
- The Wi-Fi light keeps blinking after setup
- Canon PIXMA G3260 behavior points back to Canon PRINT discovery, GI-21 ink flow, and rear-tray paper alignment.
- 01
Start from a clean device list
Remove failed duplicate entries from the official app and operating system before starting setup again. On the Canon PIXMA G3260, use Canon PRINT or the 2-line monochrome LCD for this check.
Expected result: The app finds only one fresh profile for the printer.
- 02
Pair beside the router
Keep the printer and phone or computer close to the main router, and use the primary 2.4 GHz network during the first setup.
Expected result: The printer is discovered and joins the network on the first attempt.
- 03
Restart the setup sequence
Restart the printer, router, and app in that order. Wait for the router to finish booting before opening the setup utility.
Expected result: Setup advances past the discovery step.
Match your symptom, jump to the right fix.
If: The app finds the printer but cannot finish
Then: Remove duplicate profiles and retry on the primary network.
If: The printer is not discovered at all
Then: Move it beside the router and use the 2.4 GHz network.
If: Setup completes but the printer drops offline
Then: Reserve the printer IP address or split the Wi-Fi bands.
Usually one of these.
- Canon PRINT discovery, GI-21 ink flow, and rear-tray paper alignment is the model-specific checkpoint to verify first.
- The setup app is using a different account, network, or device than the printer.
- The router is hiding the 2.4 GHz network or isolating new devices.
- A previous partial setup left a duplicate printer profile behind.
Move to the deeper fix.
Reset only the network settings
Use the model guide to reset network settings, not the full factory state, then add the printer again from the official setup app.
Expected result: The printer returns to a clean network state without erasing other settings.
Finish by IP address
If discovery fails but the printer has an address, add it manually with the official TCP/IP or network-printer option. Use the official Canon support page for the exact Canon PIXMA G3260 package before changing firmware or resetting the device.
Expected result: The printer is added manually and completes setup.
- Do not factory-reset before trying a network reset. A full reset erases settings you may want to keep.
Before you reset everything.
Why does printer setup stop at the last step?
The printer may have joined Wi-Fi but failed registration, discovery, or app permissions. Remove the duplicate entry and retry on the primary network. On this model, start with Canon PRINT and the official support instructions.
Should I factory reset before setup?
Use a network reset first. A full factory reset can erase useful settings and is rarely needed for a first setup failure.
Do I need the manufacturer app, or can I use system settings?
The official app is the most reliable path, but adding the printer by IP in system settings also works for basic printing.
Canon PIXMA G3260 facts that change the fix.
Supplies and parts
- Ink bottles
- GI-21 Black (PGBK), GI-21 Cyan, GI-21 Magenta, GI-21 Yellow
- Maintenance box
- MC-G02 maintenance cartridge (user-replaceable)
- User replaceable
- ink bottles, maintenance cartridge
The ink lamp lights or support code 1640 appears when ink reaches the lower limit. Refill to the fill line.
Error codes and lights
Out of paper.
Load paper and press OK.
Cover is open.
Close the cover.
Paper jam.
Clear the jam.
Ink reached the lower limit.
Refill the ink tanks.
Maintenance cartridge is not installed.
Install an MC-G02.
Maintenance cartridge cannot be used.
Replace with the correct MC-G02.
Maintenance cartridge is not recognized.
Reseat or replace the MC-G02.
Maintenance cartridge is full.
Replace the MC-G02.
Carriage error.
Clear any obstruction and restart.
Print head temperature error.
Let it cool and restart.
Connectivity and operating systems
- Connection
- Wi-Fi · USB
- Wi-Fi
- 2.4 GHz only
- Control panel
- 2-line monochrome LCD
- Paper trays
- Rear tray only (100 sheets)
- Works with
- Windows 10, Windows 8.1, Windows 7 SP1, macOS, iOS, Android
Use the exact model guide.
These links point to the manufacturer resources for this model. Use the manual for panel symbols and the driver page for software or operating-system issues.
Sources checked 2026-08-13.